Textile Spinning Lubricants

Product Details:

CVC Ringlube is a high performance non-staining low friction antistatic synthetic oil specially developed for the lubrication of Ring & Ring Traveller  in the Ring frames of textile mills. CVC Ringlube will not leave any carbonaceous deposit and therefore will increase the productivity and life of Ring Travellers. It is clear transparent washable oil with low viscosity, suitable for most applications. It necessary, the viscosity of this product can be varied to take care of special conditions.

Benefits:

• A non-staining oil and self-cleaning oil
• It reduces yarn imperfections
• Having antistatic and antirust properties
• Does not leave any carbonaceous deposit
• Keeps Ring travellers shiny by preventing tarnishing
• It reduces the power consumption by reducing friction
• It increases life of Ring Travellers by reducing their wear
• It reduces operating temperature of Ring Travellers
• Eco friendly oil
• It allows increase in the Spindle speed by about 1000 RPM thus increasing productivity by 7%

Application:

During the normal maintenance period, clean the rings thoroughly with clean lint free hosiery fabric piece. Wet the hosiery fabric with CVC Ringlube Oil and apply on the rings. Also wet the ring travellers with CVC Ringlube before fixing them on the rings.

Additional Information:

• Item Code: CVC_RINGLUBE

Product Details:

MOLYLUBE® or Dry Film Moly Lubricant is a clean, dry lubricant, based on molybdenum disulfide, chemically inert, forms a thin tenacious antifriction film capable of withstanding extreme pressures (100,000 psi) and temperatures (-180°C to +400°C). Protects against seizure, fretting, scoring etc. and will free seized threaded connections with deep penetrating and lubricating action.

Features:

• Molybdenum disulphide in a binder solvent system to achieve a bonded lubricating film by spraying over the bearing surface
• It is a single component, air-drying, ready-to-use spray, which can withstand extremes of temperature and loads, when applied over the bearing surfaces
• CVC MOLYBOND-100 establishes uniform coating, forming a solid lubricating film of considerable tenacity. It forms thermally and electrically conductive film

Benefits:

• Clean, Dry Lubricant
• Inert Lubricant
• Permanent Lubricant
• Running-in Lubricant
• Extreme Temperature Lubricant
• Acts as a clean dry lubricant
• Long life lubricant
• Chemically inert lubricant
• Mould release agent
• Non-stick lubricant

Specifications:

Applications:

Bearings, slides, ways, shafts, journals, gears, rams, fasteners, chain wheels, conveyor, sprockets, pins, bushes, plungers, springs, hinges, threaded connections, locks, linkages, splines, sleeves, etc.


Packing:

• 550 ml Aerosol Tin
• 5 litre Carboy

Additional Information:

• Item Code: CVC_MOLYLUBE

Product Details:

CVC Electrolube® is a high quality Electrical Contact Cleaner-cum-lubricant which cleans carbon deposits, greases and other contaminants and protects electrical contact from humidity and corrosion. It maintains electrical conductivity, prevents electrolytic action and eliminates contact burns providing a non-drying water repellant film.

Features:

• Is a non-flammable, demoisturizing, carbon removing and safe cleaning agent with low toxicity and high solvent power

Benefits:

• Protects from wear & corrosion
• Cleans carbon & other deposits
• Improves conductivity of contacts
• Restores electrical continuity on all types of contacts & controls
• Removes grease, dirt, oil & oxidation from Electric Motor windings all other Electrical & Electronic components

Specifications:



Application:

• Contactors, Relays, Switches, Test instruments, Computers, Telephone systems, Photographic equipments, Circuit breakers, Control panels, etc. in Textile industry.

Packing:

• 250 ml Aerosol Tins
• 550 ml Aerosol Tins

Additional Information:

• Item Code: CVC_ELECTROLUBE

Product Details:

EP MOLY Spray for Autoconer Cams or CVC MOLYTEX® is based on Molybdenum disulphide, Synthetic lubricant and chemical additives such as anti-oxident and rust inhibitor to provide long-term, smooth lubricating action under extremes of loads and temperatures. It also protects metal parts from rust and corrosion when subjected to humidity and corrosive atmosphere. It also acts as a fuel economy additive for motor oils and EP & Anti-wear additive to improve efficiency of industrial lubricants.

Benefits:

• Antiwear and EP lubricant
• Prevents from seizure fretting and scoring
• Withstands heavy load/high temperature chemically inert
• Frees seized threaded connections
• Protect from rust

Specifications:


Application:

It is also employed as an assembly lubricant for high-precision fine finish components and threaded connections. Applicable on bearings, slides, cams, chains, gears, hinges, linkages.

Packing:

• 250 ml Aerosol Tin
• 5 litre Carboy.

Additional Information:

• Item Code: CVC_MOLYTEX

Product Details:

CVC Molybond Spray or Dry Film Moly Coating is a stable suspension of micro size Molybdenum disulphide in a binder solvent system to achieve a bonded lubricating film by spraying over the bearing surface. It is a single component, air-drying, ready-to-use spray, which can withstand extremes of temperature and loads, when applied over the bearing surfaces. CVC Molybond-100 establishes uniform bonded coating, forming a solid lubricating film of Moly of considerable tenacity to withstand load of 500,000 psi. It forms thermally and electrically conductive film.

Benefits:

• Acts as a clean dry lubricant.
• Long life lubricant.
• Chemically inert lubricant.
• Mould release agent.
• Non-stick lubricant.

Application:

For open gears, chains, threaded connections, splines, hinges, pivots etc. wherever dry film lubrication is required, for inaccessible points.

Packing:

• 550 ml Aerosol Tin
• 1 kg Metal Tin
• 5 kg Metal Tin

Additional Information:

• Item Code: CVC_MOLYBOND_SPRAY

Product Details:

CVC PCB-500 Conformal Coating for Printed Circuits is specially formulated to provide an instantaneous clear, dry, protective coating for PCB to protect from moisture, corrosion, tracking, dirt & dust, fungus and pollution. It is a solder-through type of coating based on modified acrylate, for easy repairs. It is scratch proof after it dries and provides easy handling & stacking during transportation. It assures long life to components and PCB against adverse conditions. It conforms to MIL–I–46058C specification and approved by C-DOT & CACT,.

Benefits:

• Dielectric, Anti-tracking Protective Coating.
• Protects from Moisture, Dirt, Dust & Pollution.

Application:

All types of printed circuit boards and assemblies, Electronic components and other parts such as battery terminals, bus bars, transformers, etc.

Packing:

• 550 ml Aerosol Can
• 5 litre Carboy

Additional Information:

• Item Code: CVC_PCB_500

Product Details:

Synol Moly Block or Anti Friction Elements are simple effective and reliable system of dry lubricants for lMW cards. These anti-friction element contains a balanced blend of solid lubricants bonded by a special resin that are spring loaded so that as the card moves each block rubs across the end of the face. This unique dry film lubricants has many fold advantages over the conventional oil and lubricants used.

Benefits:

• Clean operation - Non-stick & non-staining lubrication reduces wear by the dry film of molybdenum Di-sulphide which is replenished every time, as the cards are in motion.
• Quieter running - Squealing between flat greatly reduced.
• Safe and efficient - Easy to use and clean operations.
• Economical - They have a long life under normal conditions when compared to conventional lubricants used.
• No wastage as lubricants is only consumed when the cards are in motion.

Size Specifications:

• 75 x 35 x 20 mm
• 56 x 50 x 13 mm
• 25 x 25 x 80 mm
• 39 x 77 x 28 mm
• 56 x 28 x 100 mm

Note: Other grades in Teflon and Synthetic polymers are also available.

Additional Information:

• Item Code: SYNOL_MOLY_BLOCKS

Product Details:

White Grease for Aqua Splicers or Synol Polylube Grease is a synthetic grease which acts as an excellent water repellent grease. It also has very good oxidation resistance and low temperature characteristics making it suitable for use over a wide working temperature range.

Benefits:

• Synthetic grease which acts as an excellent water repellent grease.
• It also has very good oxidation resistance and low temperature characteristics making it suitable for use over a wide working temperature range of -50°C to +200°C.
• Specially manufactured for SAVIO AUTOWINDERS.

Application:

Aqua splicers and excellent lubricant for the machinery operating under humid environment.

Packing:

• 1 kg Jar
• 10 kg Bucket

Additional Information:

• Item Code: SYNOL_POLYLUBE_GREASE

Product Details:

CVC Texlube Knotter Cleaner Spray also known as Splicer/Knotter Cleaner is non-staining cleaner-cum-lubricant for modern textile machinery used for various operations such as spinning, winding and weaving, knitting etc. Based on a specialty cleaner, synthetic lubricant and other chemical additives, it immediately penetrates and cleans tint, fluff, dust and other deposits accumulated on surfaces. Further it leaves a thin, non-staining and non-sticky film of lubricant on all types of scissors & cutters of splicers / knotters which protects exposed surface from rust & corrosion and reduces the wear & tear of moving parts. Specially formulated for splicers and knotters of Savio Smartconer, Schlafhorst, Autoconer Murata Mach-Coner and Mesdan/Padmatex RJK/Peass winders.

Benefits:

• Non-staining
• Cleans carbon and fluff deposits
• Lubricates & Protects
• Protects from rust and corrosion

Specifications:


Application:

Knotter of autoconers and winders, spinning and weaving machinery, knitting and sewing machines-Delicate mechanism and other high speed equipments.

Packing:

• 550 ml Aerosol Tin

Additional Information:

• Item Code: CVC_TEXLUBE_SPRAY